5
Castaway Boats ~ Box 39, Farmington, BC V0C 1N0 ~ Toll free 1-877-789-9008
~ Outdoor fun. Manufactured for everyone ~
Fires
Fires in any situation are a danger. Fires on
a boat while under way are even more so.
Be prepared.
Regulations exist which require boat
operators to ensure they have adequate fire
suppression for their vessel. These
regulations reflect the minimum
requirements only.
Proper safety planning and preparedness
will:
•
Minimize the risk of fires occurring in
the first place, and
•
Significantly reduce the damage to
property and the potential for injury or
death in the event that a fire occurs.
Fire prevention suggestions:
•
Use extreme caution around fuel.
Gasoline is a highly flammable and
explosive substance. Refrain from
smoking and ensure that the area in
which you are fueling is free from
ignition sources.
•
Ensure all fuel containers are free of
defects and/or leaks prior to use and
handling.
•
Fuel leaks are serious safety and
environmental hazards. In the event of
a fuel leak, identify the cause and if
possible correct it. Clean the leak up
with dry rags, and dispose of them in
accordance with applicable laws.
•
Maintain a clean work and play space.
Combustible materials can easily be
accidentally knocked into ignition
sources. By maintaining a clean area,
you minimize the opportunity for
accidents to occur.
Fire Suppression
Fire Extinguishers:
Fire extinguishers are designed to put out
small fires, not large ones. The type of fire
extinguisher you are required to use
depends on both the length of your vessel
and the type of fire you may have to put out.
Ensure you have the right fire extinguisher
for the appropriate type of fire.
TYPE:
A. Ordinary Combustibles – Fire starting
with paper, cardboard, wood, or upholstery
require a TYPE A extinguisher.
B. Flammable and Combustible Liquids –
Fires originating from fuel, oil, grease, paint,
solvents, or other flammable liquids require
a TYPE B extinguisher.
C. Electrical Equipment – Fires starting with
wiring, blown fuses, conductors, batteries,
or other electrical sources require a TYPE C
extinguisher.
D. Metals – Some metals such as
magnesium and sodium require a special
dry powder class TYPE D extinguisher.
Extinguishers come in dry chemical, water,
foam, carbon dioxide, or Halon form. All
types should be labeled by a nationally
recognized testing laboratory.
Always ensure that your fire extinguisher is
functional by observing the manufacturer’s
procedures in keeping your fire extinguisher
charged and ready for use.
Some signs that you may need to have your
fire extinguisher checked or recharged
could include:
- A missing or damaged handle.
- The pull pin is missing, or the tamper seal
holding the pin in place is missing.
- The pressure gauge arrow is not showing
the “green” area of the gauge.
- Labels on the extinguisher indicate that it
is time to bring it in to check the charge.
- Other obvious damage to the extinguisher.
Summary of Contents for CCBL1
Page 4: ......