CLEANING AND MAINTENANCE
Cast Tec recommend that this appliance is serviced at regular 12 monthly intervals. The flue should also be
checked regularly to ensure that all products of combustion are entering the flue and there is no excessive build
up of soot.
It is the user’s responsibility to ensure that the appliance is kept in a clean serviceable condition.
To remove the glass
1. Remove the magnetic trim and store to one side to prevent any damage.
2. Remove the louvered panel by lifting up and pulling forwards.
3. Slacken the five machine screws on the top retaining strip.
4. Unscrew the two securing screws from the lower infill panel and remove the panel. Tilt the glass forwards and
slide out.
5. Clean the glass with a damp cloth. For stubborn stains use a proprietary cream cleaner or ceramic hob
cleaner.
Ceramic Components and Fuel Bed
Debris from any source should be removed with a soft brush.
Please ensure that any debris including soot deposits are removed from the appliance and not left on the fuel
bed.
It is recommended that the user should, on a regular quarterly basis, carefully remove all ceramic components
and thoroughly clean the stainless steel burner strip and the pilot assembly. Any build up of debris in this area
could affect the operation of the appliance.
NOTE:
It is common to find surface cracks in the ceramic components. This is due to the expansion and
contraction of the ceramic fibres caused by the intense heat that the burner generates. The cracks will not affect
the safe operation of this appliance. However, great care must be taken when handling the ceramic components
as they will break if handled incorrectly. Do not use a vacuum cleaner to clean the ceramics.
Ceramic Liners
- Use only a soft brush to remove any soot deposits from the ceramic liners during cleaning as
this is the only method that can be used to remove deposits. The ceramic liners are very delicate and should be
treated accordingly.
6. Reassemble in reverse order. The screws should be tightened enough to ensure the glass is sealed. The
glass should be positioned centrally to ensure the decorative trim will fit over it.
Trims and Frets
- The trim and fret should be removed from the appliance for cleaning, please ensure that the
appliance has cooled thoroughly. Metal trims and frets maybe lacquer coated and Atherefore do not require
polishing.
Your appliance is guaranteed for one year from proof of purchase. Should the appliance prove defective within
that period we agree to repair or replace (at our discretion) the component or appliance provided that:
1. The user can produce a receipt for proof of purchase/installation.
2. The appliance has been supplied by an authorised stockist and has been installed by a qualified installer, all
installation and operating instructions have been strictly adhered to.
3. No alterations have been carried out on the appliance or component parts without our written consent.
4. The appliance has not been used for any purpose other than those intended.
5. The appliance has not been damaged accidentally or due to fair wear and tear.
Guarantee claims should be made through your appliance supplier. The Guarantee is restricted to UK
Mainland and is additional to your statutory rights.
GUARANTEE
Unit 404 Glenfield Park Business Centre Blakewater Road Blackburn Lancashire BB1 5QH
Tel: 01254 695244 Fax: 01254 695255 Web: www.legend-fires.com Email: [email protected]
Issue 4 - 17/11/16
