27
Source Name
The
Source Name
button provides a way to customize the names of the sources
as displayed on the Source Selection screen(s). For example, if you have the
optional phono stage installed, you might want to rename the source button for
R2/L2 “Phono” to make it easier to remember.
To change source names, use the keyboard on the touchscreen. Note that the
size of the source buttons varies depending whether you have 1-3, 4-6 or 7-9+
sources enabled, so the length of name that may be fully displayed on the button
will likewise vary.
After entering the source name, press Enter on the keyboard to save the change.
Configuration
The
Configuration
button allows you to assign one of the up to six
configuration options (see Configuration Setup) as the default for the source
button being set up. Whenever this source is selected, that configuration will be
employed. You might set up one source such as a disc player to have a default
configuration with a subwoofer crossed over at 80 Hz for movies. You may then
set up another source button for the same disc player with a different default
configuration, say one with a subwoofer crossed over at 40 Hz, for music.
Configurations are speaker setups, and are discussed in more detail later in this
section.
NOTE: The default Configuration assignment can be temporarily
overridden from an Fkey on the remote, the configurations page on the
Classe app or from the
Configurations
button on the main Menu page. See
the section, Using the Sigma 2200i, for more details.
Input Offset
Input Offset
is used to ensure that all sources playback at comparable levels.
There can be significant differences in output levels, especially among analog
sources, which can lead to unexpected changes in volume when switching
among them. The Sigma 2200i provides an input offset adjustment range from
-10 to +10 dB.
Configuration Setup
The
Configuration Setup
page allows you to define outputs for up to six
different speaker configurations. Touch the button for the specific configuration
you want to set up to open its configuration setup menu. The page contains
buttons for naming the configuration, enabling the Subwoofer output and
choosing crossover settings.
Configuration Name
As with naming sources, press the Configuration Name button to access the
keyboard used for customizing the configuration name.
Remember to press Enter
after making your changes to save the new name.
Summary of Contents for Sigma 2200i
Page 1: ...Owner s Manual Sigma 2200i Stereo Integrated Amplifier...
Page 47: ...47...
