22
Step 6
Double-check all your connections.
We understand that this step sounds redundant, but it is worth the extra minute
or two it might take just to ensure that all connections are correct and secure.
Step 7
Power up the system!
Now you are ready to power up your Sigma 2200i and your audio system.
• Press the standby button.
The initial power-up cycle of the 2200i takes
a few seconds.
• When the power-up cycle is complete, the integrated amplifier enters
Operate mode and the touchscreen becomes active.
• Press the
Standby
button to toggle the Sigma 2200i into and out of
Standby.
The physical setup of the Sigma 2200i Integrated Amplifier and system
components is complete.
Note that putting the Sigma 2200i into standby saves all settings in non-
volatile memory. If you should make changes to the setup and remove AC
power without first having entered standby, those changes will be lost.
Summary of Contents for Sigma 2200i
Page 1: ...Owner s Manual Sigma 2200i Stereo Integrated Amplifier...
Page 47: ...47...
