19
Version 270114
-
Place the appliance under a fume hood in order to draw away steam produced when
the appliance is in function.
-
Place the appliance so that the user can easily move to use it.
-
The plug must be protected by a circuit breaker of 16 A. Connect the appliance
directly to a wall plug socket. The use of adaptors, multiple sockets and/or
extensions is not recommended.
-
Before connecting the appliance to an electricity source, ensure that the voltage
and frequency values given on the panel correspond to those of the electrical
network.
The maximum permissible voltage difference is +/- 10%
-
The appliance must be connected to the equipotential bonding system (grounding)
-
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
Starting up:
-
Prior to first use, clean the appliance carefully with a clean humid cloth and an
adapted detergent. Rinse and dry.
-
In order to switch on the oven, turn clockwise the knob (A) of the timer until
reaching the requested time of cooking from 0 to 15 minutes. The orange light (B)
turns on to signal that the appliance is on. In order to use the oven without timing,
you can choose the manual mode by turning the knob anticlockwise until pointer is
in the position ON.
-
To regulate the temperature of the oven, turn clockwise the thermostat knob (D)
until reaching the requested temperature between 50 and 300 degrees. When
temperature is reached, the green light (c) turn off. To turn off heating elements
before set time, turn slowly timer knob anticlockwise until reaching the 0 position.
Take care, as forced operation can damage it seriously! Open and close the door
using the handle. Avoid putting hands in when the oven is on or is still hot. Use
gloves or appropriate accessories for this purpose.
WARNING ! Danger of burns!
Very hot steam may burn hands, arms or fingers. Always use protective gloves
when removing baskets from hot water.
If not in use disconnect the power cord of the appliance.
