Casselin 3611630000048, User Manual

Page: 13 / 64

EN
3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
The check for the absence of damage and the completeness of the device must be carried out upon receipt
of the package. In the event of identification of damage due to transport, refuse or accept the delivered
product only with reservations *. A complaint detailing the defects observed must then be made. The
perception of damage is only possible in the event of a complaint formulated within the prescribed time limits,
ie 24-48 hours at most.
* written on the carrier's delivery papers or digital.
3.2 packaging
The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.
3.3. Storage
WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock exceeding 2 months (general condition of the device and all the constituent elements)
• No material shaking
• Storage in closed room and not outside.
4. EQUIPMENT CHARACTERISTICS
* Subject to change
Model
CVR100LN CVR100LB
Temperature 2-12 ° C 2-12 ° C
Supply voltage 220V / 50Hz 220V / 50Hz
Dimensions W685 x D 455 x H 675 mm W685 x D 455 x H 675 mm
Weight 40.5 Kg 40.5Kg
Accessories 2 grid shelves 2 grid shelves
Digital temperature regulator:
- The regulator is located at the back of the device
- There are two buttons to lower or raise the temperature
- The first liquid crystal indicator corresponds to the compressor, lit when the compressor
is on for cooling
- The second liquid crystal indicator corresponds to defrost, lit when defrost
automatic is on
- This button corresponds to LED lighting