Caso VAKO2, Manual

Page: 26 / 72

Caso Wasserkocher VAKO²
26
15.1 Before first use
Fill the device with water up to the maximum water level. Boil the water and let the device
cool down. Discard the water. Repeat this.
15.2 Use
Remove the pot from the base and open the lid. Fill water into the pot.
Please note
► Do not fill the pot over maximum level as water may spout when boiling. Make sure the
lid is firmly closed before you place it on the base again.
Place the device on the base and connect to suitable power supply.
Press on/off-button. The button will light up to show that the device is heating up. The light
will switch off when boiling has finished. The device switches off automatically.
During the boiling process you can stop heating at everytime by pressing on/off-button.
Lift the pot from the base. Press the spout opener and pour the hot water.
Attention: Risk of scalding
► Use caution when pouring the hot water and do not open the lid, use the spout opener.
The water in the pot is kept warm due tot he vacuum between inner and outer pot without
any power consumption (2hrs thermal insulation of 80 °C, 4 hrs thermal insulation of 70°C)
15.3 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
15.4 Safety information
Attention
Please observe the following safety notices, before you commence with cleaning the
device:
► The VAKO² must be cleaned at regular intervals and calcium deposits should be
removed.
► Switch the device off prior to cleaning it and unplug the plug from the wall power outlet.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
► Do not immerse pot, base or power cord in water.
15.5 Cleaning

Pot

Rinse the pot with a damp cloth.