Caso B300 VacuServe, Operating Manual

Page: 41 / 138

41
Place the jug with the lid and the blade base on the motor block in such a way that

is
placed above this symbol , screw it tight clockwise until

is positioned above the
symbol.
Or place the blender bottle with the lid and the blade base on the motor block in such a
way that

is placed above this symbol , screw it tight clockwise until

is positioned
above the symbol.
Fill the blender attachment with the desired foods then attach the 2 blade bade and screw
it clockwise, place it on the motor block in such a way that

is placed above this symbol
, screw it tight clockwise until

is positioned above the symbol.
13.3 Rating plate
The rating plate with the connection and performance data can be found beneath the
device.
14
Operation and Handing
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Warning
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.
14.1 Before initial use
Clean the device as shown in cleaning and maintenance.
14.2 Use of jar / mixing vessel or blender bottles
1. Place jar or blender bottles with assembled blade base on a stable surface.
2. Add desired food into the jar / blender bottles.
3. Please note: The amount of filled food with drinking water shall not exceed the highest
marking. First fill the liquid and then the solid ingredients unless your recipe demands
otherwise.
4. Pay attention to the proportion of food to drinking water.
Food Water capacity
250-300g 500-450g 750 ml (jar)
200-240g 360-400g 600 ml (big blender bottle)
100-130g 270-300g 400 ml (small blender bottle)
5. Close the jar with mounted blade base with the lid and place it on the motor block,
alternatively add the blender bottle with blade base on the motor block.