Caso B300 VacuServe, Operating Manual

Page: 48 / 138

48
Motor block: Wipe the motor block with a damp cloth.
16
Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
16.1 Security advices
Attention
► Repairs of electrical appliances must be carried out by qualified personnel who are
trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the user
and damage the machine.
16.2 Troubleshooting
Problem Solution
The device does not start.
Please check whether the power plug is properly
plugged. Please check whether the assembly is done
according to assembly methods.
When used for the first time,
odours may arise at the motor
block. This is normal.
The odour disappears with repeated use.
The appliance stops during use. The appliance is equipped with overheating protection.
If the appliance has been operated for too long or has
been operated when overfilled, the appliance switches
itself off automatically.
Pull the mains plug and allow the appliance to cool
down for at least half an hour. You can then operate
the appliance as usual.
The appliance vibrates
abnormally or makes unusual
noises. Make sure that the appliance is assembled correctly.
Liquid leaks out during use.
Pull the mains plug. Check that the appliance is
assembled correctly.
The blades become stuck.
Pull the mains plug. Remove the foods which block the
blades. The foods are too large. Cut the foods into
pieces.
The appliance does not
vacuum.
The blender bottle or jug is not assembled correctly
meaning no vacuum can be generated. Check that the
vacuum valve is inserted correctly. Check that the
appliance is assembled correctly.
Attention
► If above mentioned steps don't solve the problem, please contact your customer
service.