Caso 3618, Original Operating Manual

Page: 39 / 121

39
4. When you clean the blade base or the blades in the grinder then use AUTO PULSE
function or carefully clean them with a brush, as they can be sharp, please handle them
carefully.
5. You can wipe the motor unit carefully with a damp cloth.
16 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
16.1 Security advices
Attention
► Repairs of electrical appliances must be carried out by qualified personnel who are
trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the user
and damage the machine.
16.2 Troubleshooting
Problem Solution
The device does not
start.
Please check whether the power plug is properly plugged.
Please check whether the assembly is done according to
assembly methods.
The unit has shut down. The overheat protection was activated.
Pull out power supply plug and wait for the motor to cool
(round about 30 minutes), then use again.
Please note
► If above mentioned steps don't solve the problem, please contact your customer
service.
► Please clean the device before sending it to customer service.
17 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials. However,
they also contain damaging substances, which were necessary for their
functionality and safety. If these were put in the non-recyclable waste or were
handled incorrectly, they could be detrimental to human health and the
environment. Therefore, do not put your old device into the non-recyclable waste
under any circumstances.
Please note
►
Utilise the collection point, established in your town, to return and recycle old electric
and electronic devices. If necessary, contact your town hall, local refuse collection
service or your dealer for information.
►
Ensure that your old device is stored safely away from children until it is taken away.