Caso 3618, Original Operating Manual

Page: 32 / 121

32
12.4 Commissioning
This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:
12.5 Safety information
Warning
► Packaging materials may not be used for playing. There is a danger of suffocation.
12.6 Delivery scope and transport inspection
As a rule, the blender B 1800 is delivered with the following components:

blender jar with lid

middle part of lid of blender jar

blade base

motor unit

grinder with lid

pusher

Mix & Go bottle with lid

operating instructions
Please note
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.
12.7 Unpacking
To unpack the device, proceed as follows:

Remove the device out of the carton and remove the packaging material.
12.8 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled. Returning the packaging back to the
material loop saves raw materials and reduces the quantities of accumulated waste.
Take any packaging materials that are no longer required to “Green Dot” recycling
collection points for disposal.
Please note
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.
12.9 Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:

Place the device on a firm and even work surface.