CASO DESIGN EMCG 32, Operating Manual

Page: 73 / 216

73
15.13.2
Operating mode “Convection” without preheating
1) Press
once and “P100” is displayed.
2) Press repeatedly or turn to select the convection mode. When
temperatures are displayed, this inidicates the convection mode. The temperature can
be chosen from 140° and 230° C.
3) Press to confirm the temperature.
4) Turn to set the cooking time to a maximum of 95 minutes and confirm by pressing
5) When the end of the cooking time has been reached the system will sound five signal
tones.
15.14
“Multi-stage Cooking" Mode
In this mode you can program up to up to 2 automatic cooking sequences. The sequence
and duration of defrosting, microwaving, grill (combination) or convection cooking can be
adjusted.
If you intend to use the defrost function, this must be programmed as the first function in
the sequence.
Please note
► The automatic cooking programmes and the preheating function cannot be used for
multi-stage cooking.

Example: If you want to defrost food for 5 minutes and then microwave the food at 80%
power level for 7 minutes proceed as follows:
1) Press
twice and “dEF2” will be displayed to indicate defrosting by time.
2) Turn to set the defrosting time to 5 minutes.
3) Press and set the power level for microwaving to 80% by until the
display shows “P80”. Press
to confirm.
4) Adjust the cooking time by turning to 7 minutes.
5) Press to start the multi-stage cooking process.
6) When the end of the cooking time has been reached the system will sound five signal
tones.