Page 6
Measure the length of the front cover required and set the
adjustable side stop nearest to the creaser unit to this length. This
set so that the left hand side of the block on the scale is used as the
measuring point as shown. This will be the first double crease
position.
Place the book pages in between the two side guide blocks and
tighten the second stop knob. This will set the position for the
second stop to create the second double crease for the cover.
Place the stock in the machine, front cover pacing upwards, against
the first stop.
Operate the handle fully downwards until it reaches the lower stop.
Raise the handle and remove the stock.
