Page 4
Creasing
Place the required creasing bars into the bar holder slots on the
machine. There are two creasing bars supplied to cover a range of
stocks from paper to card. Ensure the bars are located correctly and
with the small removal tool holes located at the exit end. This
allows the bars to be easily removed with the tool provided.
The upper bar can only be fitted by slightly operating the
impression handle down so that the guides appear in the outer
cover.
Set the side guide to the desired distance using the right hand side
of the setting block against the scale.
Insert the stock ensuring that it aligns correctly against the side bar,
adjustable end stop and alignment knob.
