background image

Safety Precautions

E-4

Location

Never locate the projector in any of the 
following types of locations. Doing so creates 
the risk of fire and electric shock.
• Near an area subject to strong vibration
• An area subject to large amounts of 

moisture or dust

• In a kitchen or other area exposed to oil 

smoke

• Near a heater, on a heated carpet, or in an 

area exposed to direct sunlight

• An area subject to temperature extremes 

(Operating temperature range is 5°C to 35°C 
(41°F to 95°F)).

Heavy objects

Never place heavy objects on the projector or 
climb on top of the projector. Doing so 
creates the risk of fire and electric shock.

Water

Never locate the projector in a bathroom or 
anywhere else there is the chance that it will 
be splashed with water.

Unstable location

Never place the projector on an 
unstable surface or on a high shelf. 
Doing so can cause it to fall, creating 
the risk of personal injury.

Using the projector on a base 
with casters

Whenever using the projector on a base that 
has casters, make sure that you lock the 
casters when not moving the base.

Lightening

During a lightening storm, do not touch the 
plug of the projector’s power cord.

Remote controller

Never try to take the remote controller 
apart or modify it in any way. Doing 
so creates the risk of electric shock, 
burn injury, and other personal injury. 
Be sure to leave all internal 
inspection, adjustment, and repair up 
to your original dealer or authorized 
CASIO Service Center.
Never allow the remote controller to 
become wet. Water creates the risk of 
fire and electric shock.

Power cord

Misuse of the power cord creates the 
risk of fire and electric shock. Make 
sure that you always observe the 
following precautions.

• Do not locate the power cord near a stove.
• When unplugging the power cord, always 

grasp the plug, and do not pull on the 
power cord.

• Insert the plug into the power outlet as far 

as it will go.

• After using the projector, turn it off. After the 

projector finishes its cool down routine, 
unplug it from the power outlet.

• Unplug the projector from the power outlet if 

you do not plan to use it for a long time.

• To avoid the built up of dust between the 

prongs of the plug, unplug it from the power 
outlet and clean between the prongs at least 
once a year.

• Before moving the projector, be sure to turn 

it off and unplug it from the power outlet 
first.

Backup of important data

Be sure to keep separate written 
records of all data stored in projector 
memory. Memory data can be lost due 
to breakdown, maintenance, etc.

Lens effect

Never have an aquarium or any other object 
that produces a lens effect in front of the 
projector while the lamp is on. Such an object 
creates the risk of fire.

Lens

Never touch the lens with your hand.

Battery Precautions

Misuse of a battery can cause it to leak and 
stain the area around it, or to explode, 
creating the risk of fire and personal injury. 
Make sure that you always observe the 
following precautions.

• Never try to take a battery apart 

and do not allow it to become 
shorted.

• Never expose a battery to heat or 

throw it into fire.

• Never try to charge the battery.
• Take care that the battery is oriented 

correctly when you load it.

Caution

Warning

Summary of Contents for XJ-35







































Reviews: