Casio X J-S400U User Manual Download | Manualshive

Page: 94 / 96

background image

94

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not
applicable to other areas).

NOTICE

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,
pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection
against  harmful  interference  in  a  residential  installation.  This  equipment  generates  uses  and  can
radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may
cause  harmful  interference  to  radio  communication.  However,  there  is  no  guarantee  that  interference
will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause  harmful  interference  to  radio
or  television  reception,  which  can  be  determined  by  turning  the  equipment  off  and  on,  the  user  is
encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the  following  measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION

Changes  or  modifications  not  expressly  approved  by  the  party  responsible  for  compliance  could  void
the  user’s  authority  to  operate  the  equipment.
Proper  connectors  must  be  used  for  connection  to  host  computer  and/or  peripherals  in  order  to  meet
FCC  emission  limits.

Connector cable....XJ-UT312WN/XJ-UT352W/XJ-UT352WN/XJ-F11X/XJ-F21XN/XJ-F101W/

XJ-F211WN/XJ-S400U/XJ-S400UN/XJ-S400W/XJ-S400WN unit to PC

Declaration of Conformity

Model Number: XJ-UT312WN/XJ-UT352W/XJ-UT352WN/XJ-F11X/XJ-F21XN/XJ-F101W/XJ-F211WN/

XJ-S400U/XJ-S400UN/XJ-S400W/XJ-S400WN

Trade  Name:  CASIO  COMPUTER  CO.,  LTD.
Responsible  party:  CASIO  AMERICA,  INC.
Address:  570  MT.  PLEASANT  AVENUE,  DOVER,  NEW  JERSEY  07801
Telephone  number:  973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1)  This  device  may  not  cause  harmful  interference,  and  (2)  this  device  must  accept  any  interference
received,  including  interference  that  may  cause  undesired  operation.

XJ-UT312WN/XJ-UT352W/
XJ-UT352WN/XJ-F11X/XJ-F21XN/
XJ-F101W/XJ-F211WN/XJ-S400U/
XJ-S400UN/XJ-S400W/XJ-S400WN

FOR CALIFORNIA USA ONLY

Perchlorate Material – special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

«
...
92
93
94
95
96
»

Summary of Contents for X J-S400U

































































































Reviews:

No comments

Related manuals for X J-S400U

Brand: Acer Pages: 3

Brand: Acer Pages: 2

Elpro Large electrol

Brand: Projecta Pages: 2

Brand: ACCO Brands Pages: 33

Brand: Eaton Pages: 8

MultiSync LT140

Brand: NEC Pages: 44

ACCU DECOLITE IP

Brand: JB Systems Pages: 16

LED Profile C34

Brand: Light Sky Pages: 28

Brand: i3PROJECTOR Pages: 60

REALITY 8200 TCR+

Brand: Barco Pages: 59

Brand: MDI Pages: 8

Brand: Barco Pages: 52

Brand: InFocus Pages: 4

Brand: Rompa Pages: 18

AVerVision VP-1

Brand: AVer Pages: 16

Brand: AVer Pages: 24

Brand: Sony Pages: 2

Brand: Sony Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands