64
Option Settings 1
3
Light Control
3
Light Sensor
Enable or disable the light sensor.
On: Enables automatic adjustment of light output in accordance with surrounding
light.
Off
*
: Disables automatic adjustment of light output.
Option Settings 1
3
Light Control
3
Light Control
Enable or disable projector light output (light source brightness).
On
*
: Enables light output adjustment.
Off: Disables light output adjustment and “Light Sensor” (above). This setting must
be selected when you want the light source to output at maximum brightness.
Option Settings 1
3
Auto Power Off
Specify the amount of time of projector operation and input signal inactivity to be
allowed before Auto Power Off is triggered to turn off projector power automatically.
Auto Power Off can be disabled, if you want.
5 min, 10 min
*
, 15 min, 20 min, 30 min: Time until Auto Power off is triggered.
Off: Disables Auto Power Off.
Option Settings 1
3
Password
Configure password settings.
For details, see “Using a Password” (page 67).
Option Settings 1
3
Direct Power On
Enable (On) and disable (Off
*
) projector auto power on as soon as the projector’s AC
power cord is plugged into a power outlet.
Option Settings 1
3
Projector ID
Configure projector ID settings.
For details, see “Configuring Remote Control ID and Projector ID Settings” (page 56).
Option Settings 1
3
Language
Specify the display language.
English, French, German, Italian, Spanish, Swedish, Portuguese, Dutch, Norwegian,
Polish, Finnish, Czech, Turkish, Russian, Lithuanian, Vietnamese, Thai, Malay,
Indonesian, Arabic, Chinese (Simplified), Chinese (Traditional), Korean, Japanese
Important!
Network Model Users
When using certain Network model functions, some menus and messages
may be displayed in English, regardless of the language selected here.
Option Settings 1
3
Restore Menu Defaults
Return all of the items in the “Option Settings 1” main menu to their initial defaults for
the currently projecting image source.
Option Settings 2
3
Audio Out
Specify whether audio input from the input sources should be output to the
projector’s speaker (Speaker
*
) or output to an external destination from the
projector’s AUDIO OUT terminal (Line).
Option Settings 2
3
Audio Input
Change the audio input.
For details, see “Changing the Audio Input” (page 46).
Option Settings 2
3
High Altitude
Turn the high-altitude fan speed setting on or off in accordance with the altitude of
the area where you are using the projector.
On: Select this setting when using the projector in a high altitude (1,500 to
3,000 meters / 5,000 to 10,000 feet above sea level) area where air is thin. This
setting increases cooling efficiency.
Off
*
: Select this setting at normal altitudes (up to 1,500 meters / 5,000 feet).
Important!
Do not use this projector at altitudes greater than 3,000 meters (10,000 feet)
above sea level.
Use this menu item:
To do this:
