E-59
Removing
1. Make sure that the power on the Paper Writer has been switched off. If the power is
still on, hold down the power button to switch off (see E-27).
2. Remove the battery pack.
3.Gently push the card in above the supporting cover ( ).
The card is pushed out ( ).
4. Pull the card out and close the supporting cover.
5. Load the battery pack.
Important!
A card must be inserted with the top and bottom properly aligned and in the
proper direction. Attempt in inserting it with an excessive force in incorrect
orientation can risk damage to the card and slot.
Touching the connectors or IC area when installing the card could result in
damage to the card through soiling or an electrostatic charge.
The battery pack will not be able to be properly installed if the card is not
properly installed. Reinstall the card properly if this happens.
Since data recorded in the Paper Writer may be lost if the battery pack is
removed for more than 10 minutes, complete the installation (or removing) of a
card within 10 minutes.
Never turn off the power or remove a card from the slot while the card is being
accessed. Doing so can damage the card or data in the card.
Do not drop the card or lose it.
•
•
•
•
•
•
Summary of Contents for V-N500 Series
