30
To turn password protection on and off
1.
Display the Power On Password setting screen by performing steps 1 through 5
of the procedure under “To change the password” on page 29.
z
At this time, make sure that “Power On Password” is selected on the Power On Password
setting screen.
2.
Use the [
W
] and [
X
] keys to select “On” or “Off”.
z
Changing the power on password setting from “Off” to “On” causes the confirmation dialog
box shown below to appear.
Press the [ENTER] key to confirm that you want to turn on power on password protection, or
[ESC] to exit the dialog box without doing anything.
3.
After you are finished, press the [MENU] key to exit the setup menu.
Entering the Password when Turning On the Projector
When you turn on the projector while password protection is turned on will cause a password input
dialog box to appear on the projection screen. All projector operations will be accessible to you after
you input the correct password and press the [ENTER] key.
Note
You can perform the projection size adjustment operation ([ZOOM +] / [ZOOM –] keys), focus
operation ([FOCUS
S
] / [FOCUS
T
] keys), and power off operation ([
P
] (Power) key) while the
password input dialog box is on the projection screen.
Summary of Contents for SLIM XJ-A141
Page 58: ...MA1111 A ...
