Casio SF-5580 Owner'S Manual Download Page 23

Page: 23 / 79

– 21 –

World Time Mode

With World Time you can view the current time in time zones around the world.

To enter the World Time Mode

Press the

HOME/WORLD

key twice. From the Home Time Mode, press

HOME/

WORLD

only once.

•

Every time you press

HOME/WORLD

, the Digital Diary switches between the

Home Time Mode and World Time Mode.

To scroll through World Time Mode zones

In the World Time Mode, use

and

to scroll from zone-to-zone.

•

Hold down either button to scroll at high speed.

To change a World Time zone’s settings

1. In the World Time Mode, display the zone you want.
2. Press

FUNC

3. Switch between 12/24 hour (page 19), switch between standard and daylight

saving time (page 19), and set the date format (page 19).

•

Timekeeping format and date format settings are applied to all World Time zones
and to the Home Time Mode.

•

The standard/daylight saving time setting is applied to the currently selected time
zone only.

•

See page 22 for details on using the Zone Change function menu item.

Current World Time
setting

Hours different from
Home Time zone

Summary of Contents for SF-5580
















































































Search results

Summary of Contents for SF-5580

Reviews:

Related manuals for SF-5580

Brands by name

Popular brands

Casio SF-5580, Owner'S Manual

Search results

Summary of Contents for SF-5580

Reviews:

Related manuals for SF-5580

Brands by name

Popular brands