Casio QV-8000SX, Service Manual & Parts List

Page: 8 / 57

— 6 —
2. In case the internal program version of the camera unit is 99.08.26 or later.
(1) Copy a program of the latest version (_ROM.BIN) and a graphic menu (_GMENU.BIN) to the
CompactFlash card.
Install the CompactFlash card into the camera.
(2) Connect an AC adaptor to the camera.
(3) Activate the TEST mode.
Turn on the power while pressing DISP and MENU keys.
(4) The LCD monitor of the camera will indicate messages as in the below.
In approximately one minute, two “OK” indications will appear, meaning that the upgrading has been
completed correctly.
Afterwards, the mode will automatically change to the camera mode.
SIZE OK 6 0 3 6 6 4
SIZE OK 1 3 7 0 9 6 0
(5) Turn off the power of the camera.
(6) Exchange the card with a CompactFlash card for photography.
(7) Activate the TEST mode and confirm the version.
Turn on the power while pressing DISP and MENU keys simultaneously.
(8) Finally, confirm operations (recording and play back).
1-3 Upgrading procedure using the PC link cable
(1) Turn off the power of the camera, and then remove the CompactFlash card.
(2) Connect the PC link cable.
Caution: Make sure to insert the L-shaped plug of the PC link cable facing the VIDEO OUT side.
Otherwise it is impossible to insert it completely.
(3) Activate the transmission program (FLOAD115.EXE).
(4) Select the program file (_ROM.BIN) or the graphic menu file (_GMENU.BIN) for transmission.
(5) Select the transmission speed (115K, 57K or 38K).
(In case an error occurs, lower the transmission speed.)
(6) Click the PROGRESS button.
(7) Connect an AC adoptor to the camera and turn the power on.