Casio QV-8000SX, Service Manual & Parts List

Page: 55 / 57

— 53 —
TROUBLESHOOTING
Trouble1 : Power does not turn on.
cause1. Shortcircuit. (L-PCB: FU102, FU103, FU104, FU105)
action1. Replace fuse.
cause2. CF cover is open.
Detect switch is broken.
action2. Close memory card cover.
Replace detect switch.
cause3. No flat cable or broken flat cable between D PCB ass’y and L PCB ass’y.
action3. Replace or install flat cable.
cause4. No flat cable or broken flat cable between D PCB ass’y and switch unit.
action4. Replace or install flat cable.
Trouble2 : Video screen failure. LCD display is OK.
cause1. Setting of NTSC/PAL is incorrect.
action1. Set the video output appropriate for the TV.
After replacing D PCB ass’y always check the setting.
Trouble3 : LCD dose not work, but Video is OK.
cause1. OPEN LCD connector or BL connector.
action1. Insert to connector. If broken, replace it.
Trouble4 : Display shows
CF ERROR
You must format the CompactFlash card before using it with this camera.
FORMAT
→
MENU
cause1. Error in CF data.
action1. Refer to the owner’s manual.
CF can be handled the same way as hard drive.
The actions noted below can be taken. No guarantee about the display.
(1) Set CF card to a PC using PC card adapter.
(2) Save files in the memory card.
(3) Execute scan disk program for CF card and recover the data error or format the
disk.
(4) Copy the correct file in memory card.
cause2. CF card hard error.
(Unable to format or scan disk)
action2. Replace CF card.
cause3. Connector for CF card on D PCB ass’y or circuit is broken.
action3. Replace connector or D PCB ass’y.