Casio QV-3EX User Manual Download Page 35

Page: 35 / 122

MEMORY CARDS

E-36

As shown in the illustra-
tion, slide the memory
card into the slot and
push it in as far as it will
go.

• If the Eject button is ex-

tended, press it in before
sliding the memory card
into the slot.

Close the memory card
slot cover.

MEMORY CARDS

This camera uses a memory card (CompactFlash card or
microdrive) for image storage.

IMPORTANT!

• Make sure that the power of the camera is turned off

before you insert or remove a memory card.

• When inserting a memory card into the camera, make

sure that the card is oriented correctly. Make sure that
the correct side of the card is facing up, and that you
insert the correct end of the card into the camera.

Inserting a Memory Card into the Camera

Open the memory card slot cover.

Surface marked with arrow

Memory card
cover release

Surface
marked with
arrow should
face up!

Eject button

Summary of Contents for QV-3EX



























































































































Search results

Summary of Contents for QV-3EX

Reviews:

Related manuals for QV-3EX

Brands by name

Popular brands

Casio QV-3EX, User Manual

Search results

Summary of Contents for QV-3EX

Reviews:

Related manuals for QV-3EX

Brands by name

Popular brands