Casio QT-8000, Service Manual

Page: 44 / 74

- 42 -
5-11-2-6. PNP/PCI Configuration
< Screen shows all default setting >
Phoenix – Award CMOS Setup Utility
PnP/PCI Configurations
Item Help
PNP OS Installed
Reset Configuration Data
Resources Controlled By
X IRQ Resources
X DMA Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
[No]
Disabled
[Auto(ESCD)]
Press Enter
Press Enter
[Disabled]
[Enabled]
[Enabled]
Menu Level
„
Select Yes if you are
using a Plug and Play
capable operating
system Select No if
you need the BIOS to
configure non-boot
devices
↑↓→←
:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
PNP OS INSTALLED:
This item allows you to determine install PnP OS or not.
RESET CONFIGURATION DATA:
Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on
and the system configuration has caused such a serious conflict that the operating
system cannot boot.
RESOURCE CONTROLLED BY:
The Award Plug and Play Bios can automatically configure all of the booth and Plug
and Play-compatible devices. However, this capability means absolutely nothing
unless you are using a Plug and Play operating system such as Windows 95. By
choosing “manual”, you are allowed to configure the IRQ Resources , DMA Resources
and Memory Resources . The choices are Auto (ESCD) and Manual.
IRQ RESOURCES:
You may assign each system interrupt a type, depending on the type of device using
the interrupt.