Casio QT-7300 Series, Service Manual

Page: 37 / 91

— 35 —
8. System fan bracket: This fixture is made of aluminum alloy to hold the built-in system fan firmly.
9. Touch screen controller: RS-232 touch screen controller assigned for COM1.
10. Power supply: The power supply adapted in this system is a super-slim 100W power which meets FCC/VDE
Class B specification.
11. Motherboard: For the QT-7300 is Celeron/Pentium III based SBC8360-4M. It combine notebook technology
to make up a compact and stable system.
12. missing number
13. Hard Disk: The QT-7300 builds in a 2.5" hard disk.
14. Separator: An aluminum-made separator is provided to separate the expansion card from the main
components. It is also to provide better EMI protection and the system’s heat dispensing.
15. Metal rear bracket: The firm bracket is to hold the main body for stand and HDD inside.
16. Plastic rear cover: Made of ABS material and special heat dispensing design.
17. Side cover: Cover the external FDD, keyboard, mouse connectors and USB ports from dust or spill.
18. Back metal fixture: Connect the main prop to the main body of the system. The large set (standard) is used
for 30
°
table standing applications, the small set (optional) for wall mounting.
19. Main prop: Made up by a inner metal piece with an outside plastic clothing. It consists of a set of strong hinges
to ensure the whole unit’s stability when a certain touch pressure is applied on the touch screen.
20. Hinge caps: The large set (standard) is used to cover the large back metal fixtures for 30
°
table standing
applications, the small set (optional) for wall mounting.
21. Cable management shroud: Made of the mixture of ABS/PC material. Hide the cables coming down from
the bottom side of the chassis and to make the operation environment look trimmed.