Casio QT-7300 Series Service Manual Download Page 51

Page: 51 / 91

— 49 —

Symptoms

Probable Causes

– Improper connection of the network cable

■

Check the RJ-45 connector installed on the NET port of the multi-I/O
expansion card.

Network function is not

– Loose connection between the multi-I/O (NET) expansion card and the

working

CPU card.

■

Pull out the multi-I/O expansion card from the CPU card then re-install
it back. If symptoms persist, replace the multi-I/O expansion card.

– Defective CPU card

■

Replace the CPU card of the System.

– Loose connection between the cash drawer connector board and multi-

I/O expansion card

■

Pull out the cash drawer connector board from the multi-I/O expansion

Cash drawer ports not

card then re-install it back. If symptoms persist, replace the cash drawer

functioning

connector board.

– Defective multi-I/O expansion card

■

Replace the multi-I/O expansion card of the system.

– Defective CPU card

■

Replace the CPU card of the System.

– Loose connection between the multi-I/O (PRN) expansion card and the

CPU card.

Printer port is not

■

Pull out the multi-I/O expansion card from the CPU card then re-install it

working

back. If symptoms persist, replace the multi-I/O expansion card.

– Defective CPU card

■

Replace the CPU card of the System.

– Loose connection between the keyboard /mouse/FDD expansion card

and the CPU card.

Keyboard/Mouse/FDD

■

Pull out the keyboard/mouse/FDD expansion card from the CPU card

are not functioning

then re-install it back. If symptoms persist, replace the keyboard/mouse/
FDD expansion card.

– Defective CPU card

■

Replace the CPU card of the System.

– Inverted connection (from HDD to CPU card) of the 44-pin HDD cable

■

Adjust and install the HDD cable properly.

HDD is not working

– Defective hard drive

■

Replace the hard disk drive of the system.

– Defective CPU card

■

Replace the CPU card of the System.

– Improper connection (from CN1 of touchscreen control board to COM3 of

the multi-I/O expansion card) of the 10-pin touchscreen control cable

Touchscreen feature is

■

Adjust and install the touchscreen control cable property.

not functioning

– Loose power connection on CN2 of the touchscreen control board.

properly

■

Pull out the power cable on CN2 then re-install it back. If symptoms
persist, consult CASIO engineers.

– Defective touchscreen control board

■

Replace the touchscreen control board of the system.

Summary of Contents for QT-7300 Series




























































































Search results

Summary of Contents for QT-7300 Series

Reviews:

Related manuals for QT-7300 Series

Brands by name

Popular brands

Casio QT-7300 Series, Service Manual

Search results

Summary of Contents for QT-7300 Series

Reviews:

Related manuals for QT-7300 Series

Brands by name

Popular brands