E-10
Using Built-in Tones
3.
Use the
to
(tone groups) buttons to
select the group you want.
Example:
To select the ORGAN group
4.
Use the
(
w
,
q
) buttons to select the
tone you want.
Example:
To select “002 Jazz Organ”
NOTE
•
Pressing
q
and
w
at the same time will jump to
tone 001 of the currently selected group. Holding
down either button changes the tone number at high
speed.
•
See page E-40 for more information about scrolling.
You can layer two different tones so they play at the
same time when you press a keyboard key.
•
The first tone you select is called the “main tone,”
while the second tone is called the “layered tone.”
1.
Select the main tone.
Example:
To select MELLOW PIANO in the CLASSIC
group, press the
(
CLASSIC
) button and
then use the
(
w
,
q
) buttons to select
“002 Mellow Piano”.
2.
Hold down the button of the group that
contains the tone you want to select as the
layered tone until “LAYER: ON” appears on
the display as shown below for a few
moments.
This will layer the tones currently selected in the two
groups.
The button you held down in step 2 will light to
indicate that it is selected.
Example:
When BASS/GUITAR group is selected
3.
Use the
(
w
,
q
) buttons to select the
tone you want in the group you selected in
step 2.
Example:
When “006 Picked Bass” is selected
4.
To unlayer the tones and return the keyboard
to a single tone, press any one of the tone
group buttons.
NOTE
•
You can adjust the balance between the main tone
and layered tone. For details, see “Layered Tone
Volume (Layer Balance)” (page E-41).
Layering Two Tones
Lit
Tone number
Tone name
Lit
Layered tone number
Layered tone name
