E-9
Playing with Different Tones
407A-E-011A
1
Simultaneously press the
TONE
buttons of
the two tones that you want to layer.
Example
: Press GRAND PIANO 1 button and
STRINGS button at the same time.
• If the layer tone is a variation tone, the indicator
lamp above the VARIATION button will light.
• The tones are now layered.
2
After you are finished using the layered
tones, press the one of the
TONE
buttons
again to unlayer them.
NOTE
• Note that you cannot layer the main tone and
variation tone assigned to the same TONE button.
Adjusting the Volume Balance between
Two Layered Tones
1
While holding down the
FUNCTION
button, use the keyboard keys shown below
to adjust the volume of the layered tones.
• To return the volume setting to its initial default,
hold down the FUNCTION button and press
both of the keys at the same time.
GRAND PIANO 1
STRINGS
▲
C
1
▲
C
2
▲
C
3
▲
C
4
▲
C
5
▲
C
6
▲
C
7
▲
C
8
왘
왗
Assigning Different Tones to the Left
and Right Sides of the Keyboard
You can assign different tones to keys on the left side
and the right side of the keyboard.
1
Press the
TONE
button of the tone you want
to select for the high (right) range.
Example
: GRAND PIANO 1
2
Press the
SPLIT
button.
• This causes the SPLIT indicator lamp to light.
3
Press the
TONE
button of the tone you want
to select for the low (left) range.
• The keyboard is now split between the two
tones.
Example
: STRINGS
4
After you are finished using the split
keyboard, press the
SPLIT
button again to
unsplit it.
• This causes the SPLIT indicator lamp to go out.
Specifying the Keyboard Tone Split Point
1
While holding down the
SPLIT
button,
press the keyboard key where you want the
left limit of the high range (right) tone to
be.
NOTE
• The split point setting also controls the point where
the keyboard splits between the accompaniment
keyboard (pages E-14, 15) and the melody
keyboard. Moving the split point also affects the
sizes of the accompaniment keyboard and the
melody keyboard.
Low range
Flash
Left limit of the high range
High range
Split Point
Low Range
High Range
STRINGS
GRAND PIANO 1
Volume of the main tone
Volume of the layered tone
Initial default (Center)
▼
▲
