PAGE
10
10
10
10
10
TIMER-SELECT MODE
In the TIMER-SELECT MODE, programmed
GREETING 1 and GREETING 2 play at specific
times. The TA-150 is shipped with the TIMER-
SELECT MODE set as follows:
GREETING 1 will play between 8:00 a.m.
and 5:00 p.m. with “GREETING 1” and
CLOCK icon appearing in the display.
GREETING 2 will play between 5:00 p.m.
and 8:00 a.m. with “GREETING 2” and
CLOCK icon appearing in the display.
Press
SKIP
to advance or
REPEAT
to
reverse the hour, until the desired time
appears in the display for GREETING 1.
4
3
Press
GREETING TIME SET
(under
the lid) to change the time for GREETING
1. The pre-set time of “8:00 AM” or the
last programmed time will appear in
display for GREETING 1.
Enter the time for
greeting one.
RECORD
CHECK
SELECT
TIME SET
GREETING
NOTE:
ν
If you hear “Enter the time”, the main clock needs to be
set. The TIMER-SELECT MODE will not work correctly
unless the main clock is set. Please see page 7 to set
the clock.
8
Press
GREETING TIME SET
again
to finish programming the TA-150 to play
the two greetings for the TIMER-SELECT
MODE. The programmed time for
GREETING 2 to play will be announced.
7
Press
SKIP
to advance or
REPEAT
to
reverse the hour, until the desired time
appears in the display for GREETING 2.
6
Once GREETING 1 is set, the time
display will automatically change to the
pre-set time or the most recently
programmed time for GREETING 2.
You will then hear:
Enter the time
for greeting two.
5
Press
GREETING TIME SET
again
to end. The programmed time for
GREETING 1 to start playing will be
announced.
9:00 a.m.
SKIP
GREETING MODES
1
GREETING 1 and 2 need to be recorded
prior to programming the
TIMER-
SELECT MODE
. (See page 8, to
“Record Greeting”.)
GREETING 2
6:00
PM
GREETING 1
9:00
AM
6:00 p.m.
2
Press
GREETING SELECT
(under
the lid) until CLOCK icon and “GREETING
1” or “GREETING 2” appears in the LCD,
depending upon the time, and you hear:
RECORD
CHECK
SELECT
TIME SET
GREETING
Timer-Select
GREETING 1
10:00
AM
