Casio Oceanus OCW-G2000C-1A, Operation Manual, Page: 13 / 21

10.
Press (C).
The day of the week hand will move
slightly, indicating that the day setting
operation is enabled.
30
Day
●
Changing the date setting will cause the
day of the week hand to rotate
repeatedly.
l
Hand and Day Indicator Movement
11.
Rotate the crown to change the day.
12.
On a time signal at the top of a minute,
push the crown back in.
Note
●
If the watch does not indicate the
correct time even after you adjust it,
correct the hand and date indicator
positions.
l
Using OCEANUS Connected to
Correct Hand Positions
l
Using Watch Operations to Correct
Hand Positions
Checking the Current Home
City
Pressing (B) will cause the second hand to
move to a letter that indicates the result of the
last time adjustment operation. After that, it will
move to the time zone of the current Home
City. Also, the disk will show the current Home
City.
●
The watch hands will return to indicating the
current time if you do not perform any
operation for nine or ten seconds.
30
Home City
Time zone
World Time
World Time lets you look up the current time
in any one of 39 cities around the globe, and
UTC (Universal Coordinated Time).
30
Getting ready
Enter the Timekeeping Mode.
l
Navigating Between Modes
30
Specifying a World Time City
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also enable
or disable summer time.
Note
●
The initial factory default summer
time setting for all cities is “AT
(AUTO)”. In many cases, the “AT
(AUTO)” setting lets you use the
watch without switching between
summer time and standard time.
1.
Pull out the crown to the first click.
The second hand will point to the time
zone of the current World Time City.
●
You can find out the availability of World
Time location information by checking
the day of the week hand.
“P”: Available
“N”: Not available
30
Crown
Day of the week hand
World Time City
Time zone
2.
Rotate the crown to change the World
Time City.
The small hour and minute hands will
indicate the current time in the World Time
city you selected.
30
World Time hour (24-hour)
World Time hour and minute
Crown
●
Pressing (A) will cause the day of the
week hand to move to the current
summer time setting.
30
●
“AT (AUTO)”
The watch switches between standard
time and summer time automatically.
●
“STD”
The watch always indicates standard
time.
●
“DST”
The watch always indicates summer
time.
3.
Hold down (A) for about one second to
change the summer time setting.
●
Each time you hold down (A) for about
one second, the summer time setting
will cycle to the next available option.
4.
Push the crown back in.
Note
●
You cannot switch between “STD”
and “DST” while “UTC” is selected
as the city.
Operation Guide 5501
13