
Basic Operations
This section provides an overview of the watch
and its operations.
Note
●
The illustrations included in this
operation guide have been created
to facilitate explanation. An
illustration may differ somewhat
from the item it represents.
Watch Face Items
⑥
⑧
⑨
⑦
②
①
③
④
⑤
A
Day of week
In the Timekeeping Mode, the day of the week
hand indicates the day of the week in the
current Home City.
B
Airplane Mode mark
While the watch is in the Airplane Mode, the
day of the week hand points to
h
.
C
Summer time setting
The day of the week hand points to the
summer time setting for the current Home City.
D
Signal receive status, location information
availability
When checking the last receive result :
The day of the week hand indicates the
information that was received or acquired for
the last time adjustment.
“P”: GPS signal time or phone time information
and location information
“N”: GPS signal time information or time
calibration signal
When setting the Home City or World Time
City :
The day of the week hand indicates whether
or not location information is available for the
Home City or World Time City.
“P”: Location information available
“N”: Location information not available
E
Last signal receive result
The second hand points to the letter that
indicates the result of the last time adjustment
operation by receipt of a signal or connection
with a phone.
“Y(YES)”: Last time adjustment operation
successful.
“N(NO)”: Last time adjustment operation
failed.
F
RC mark
The second hand points to this mark while
calibration signal reception is in progress.
G
T+P mark
The second hand points to this mark while
GPS (location information) signal reception is
in progress.
H
T (Time) mark
The second hand points to this mark while
GPS (time information) signal reception is in
progress.
I
C mark
The second hand points to this mark while
there is a connection between the watch and
a phone.
Navigating Between Modes
Your watch has the modes shown below.
C
C
C
30
30
Bluetooth connection
(Approximately
2.5 seconds)
Stopwatch Mode
Timekeeping Mode
Use the (C) button to navigate between
modes.
To connect with a phone, hold down (C) for
about 2.5 seconds.
Mode Overview
●
Timekeeping Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands indicate the
current World Time.
30
③ ④ ⑤ ⑥ ⑦
②
①
Current location time /
World Time swapping
(Hold down about
3 seconds.)
A
Current location time (24-hour time)
One revolution every 24 hours.
B
Current day of the week
C
World Time hour (24-hour time)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.
D
World Time hour
E
World Time minute
F
Current location date
G
World Time City
●
Stopwatch Mode
The main hour and minute hands indicate the
current time.
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
30
③ ④ ⑤
① ②
Start/
Stop
Reset
A
Current location time (24-hour time)
One revolution every 24 hours.
B
Stopwatch seconds
C
Stopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
D
Stopwatch hours
E
Stopwatch minutes
Operation Guide 5501
2