New functions have been added in upgraded software. Please read this
slip to know how to use them.
To check the version of your Logosease, visit our web.
(http://logosease.yamagata-casio.co.jp/en)
In this function, Logosease automatically turns into transmitting mode
when you speak. Speak clear sound such as "EEE" at the first in receiving
mode. You will hear "pi, bo" from the speaker and the unit will turn into
transmitting mode automatically. The sound "EEE" is the switch to change
the mode to transmitting. A receiver will not hear the sound "EEE".
This function allows hands-free conversation.
No sound for 3 seconds or tapping one time makes the transmitting
mode finish. You will hear "pi, bo, bo, bo" from your speaker, and the mode
will change to receiving mode.
* VOX function does not work in receiving mode. In that case, cover the antenna
with your hand and tap the Logosease.
Whistle mode transmits buzzer sound of "beep" "beep" to other divers
who set Logosease.
If you don't tap to change the mode, "beep" will go on until the battery
dies.
Tap 5 times or more and buzzer sounds of "beep" "beep" will be transmitted
continuously. At that time, same "beep" sound will be heard from your speaker
too.
LED will blink in red in "Whistle" mode.
①
②
①
②
When mode becomes "Whistle" mode by mistake, change the mode
to Receiving mode immediately.
If "beep" sound is too noisy, move a Logosease away from your face,
or remove it from your mask.
・
・
・
ver. 2.1
"pi, bo"
"pi, bo bo bo"
* VOX function/automatic transmission OFF function may not work depending
on voice character or way of speaking. In this case, please turn the function
off, and change the mode by tapping.
(Refer to
4 Customizing function
)
Advanced model (LGS-RG004), Basic model (LGS-RG005BA)
(Added on Ver. 201016 to LGS-RG004,LGS-RG005BA)
* We recommend the sound "EEE" to switch into transmitting mode.
Receiving mode
yellow
tapping
or
VOX
tapping
or
in 3 sec.
after
speaking is
finished.
Transmitting mode
pink
1. Hands-free(VOX)function
3. Voice recording
4. Customizing function
5. Training mode
6. Whistle mode
2. Channel switching
RG004 has built-in 512MB flash memory. You can use as voice recorder
to record voices in diving. You can select from 4 patterns of recording.
Channel A
: 32 KHz USB blinking in yellow in receiving
Channel B
: 36 KHz USB blinking in blue in receiving
Channel C
: 40 KHz LSB blinking in light blue in receiving
You can select a channel from Channel A, B, and C.
Communication features are different in each channel. The channel A
has the most powerful transmission and B and C are not as powerful as
channel A. In cross talk, by switching into channel B or C, you can enjoy
private conversation without anyone hearing.
* If group of channel B and C are talking close each other, conversation
will not be transmitted to divers using other channel, but slight
interference may occur. Logosease does not change the mode to
transmitting easily when receiving voices. In that case, cover the antenna
with your hand and tap the Logosease to change the mode.
Channel A is the default setting. To change the channel, use Customizing
Tool on PC. (Refer to
4 Customizing function)
(Added on Ver. 201016 to LGS-RG004 only
)
(Added on Ver. 201016 to LGS-RG004 only)
(Added at Ver. 201026 to RG004 and RG005BA)
Download the "Customizing Setting Tool" from Logosease Special Site.
This function works in Windows XP, Vista, 7, and 8 only. Please make
sure to connect via USB hub (not contained in the Logosease box) .
(Added at Ver. 201016 for LGS-RG004,
and some of the functions at Ver. 201026 for LGS-RG005BA)
You can select volume from 5 different levels. With higher volume
level, clearer voices you can hear even it comes far away. However,
depending on the regulator you use, you may hear your breathing
sound from the speaker loudly. Turning down the volume, voice level
will become appropriate for close distance. The default setting is
level 5 (max).
Adjusting volume (volume)
(Applied to LGS-RG005 also)
"Automatic transmission OFF" is the function to switch into receiving
mode automatically when no sound is heard from the unit for 3 seconds
in the transmitting mode.
Automatic transmission OFF setting
(Automatic switching from "Transmitting" to "Receiving")
*Not use
*Use (default)
Selecting channel (Channel)
*Channel A (default)
*Channel B
*Channel C
*OFF - No use
*All record - Recording both transmitted/received voices (default)
*Transmitting record - Recording only transmitted voice
*Receiving record - Recording only received voice
*Record only - No transmitting / receiving voices but use as voice
recorder. In using as voice recorder, the unit records voices with
normal transmitting operation.
Voice recording function (Voice recorder)
You can select from 4 options below.
When you switch into training mode, your voice will be recorded temporarily
and repeated for a certain period of time. By this function, you can check
how your voice would be heard to your buddy. Please use the function
for speech practice or checking setting position of bone conduction
microphone.
(Added at Ver. 201016 for RG004 only)
■
How to switch into training mode
■
To switch "Whistle mode"
(Turn the unit ON in water)
Recording voice
Tap 3 times
(with 0.5 sec. interval)
Start recording
Speak
White
①
(with approx. 0.5 sec. interval)
ON
OFF
Tap 5 times or more.
①
Tap one time.
①
②
②
②
③
pi, pi, pi, pi, bo
beep,beep
LED
LED
LED
Example:
Can you hear me?
Turn the "Whistle" mode ON.
Turn the "Whistle" mode OFF.
Red
Yellow
Tap one time.
Mode will change to "Receiving" mode.
Caution!
Additional functions
"Transmitting record" mode
Records only transmitted voices in a file.
"Receiving record" mode
Records only received voices in a file.
"All record" mode
Records both transmitted and received voices in a file.
"Record only (Voice recorder) mode
The default setting of voice recording is "All record" mode. To change
the recording mode, use "Customized Tool" on PC.
(Refer to 4 Customizing function)
Under the Voice folder, voice data files will be stored. Stored files
have sequential numbers from No. 1 to No. 99. File names are set
as below rule.
When you recorded up to No.99, old files will be overwritten. If the
memory is insufficient while writing, writing stops at the point.
*Connect Windows PC -> USB hub (not contained in the Logosease
box) -> attached USB cable ->
* The transmitting ending sound of {Pi, bo, bo, bo] will not be heard by receiving divers.
cradle in this order.
*After diving, wipe water off from the Logosease and set at the
cradle.
*Logosease is recognized as USB memory. Retrieve the voice data
file from Voice folder.
*When you do not access for 10 minutes after connection, it will be
automatically disconnected. In this case, please connect theunit
again.
* Wipe off water or dirt completely before setting it in the cradle.
8KHz sampling rate, monaural
16 bit, quantized code
File format: wav
Memory capacity: max. 480 minutes voice data
・
・
・
・
RG4-0001.WAV ~ RG4-0099.WAV
This is the mode functioning as voice recorder without
transmitting/receiving voices. Use this mode when you
want to use the unit as voice recorder, not as two way
radio. Voice is recorded in the transmitting mode by
tapping or VOX function. "Record only" mode starts
with LED blinking in white, and LED turns into pink while
recording.
Specification of recorded voice
・
Folder composition
・
How to retrieve voice data
・
You can adjust the sensitivity level of VOX (hands-free) function as
you like. (added at Ver. 201026)
If VOX is not activated easily or is activated too easily, adjust the VOX
sensitivity level.
0
1
2
3
OFF
low
(hard to activate)
(easy to activate)
default
high
Sensitivity level
4
5
(Applied to LGS-RG005 also)
You can select to use or not to use VOX function.
VOX (hands-free) mode
*Not use
*Use (default)
Playing recorded voice
Red
Tap once
(right after speaking)
①
Play recorded voice after recording
After playing, the unit automatically turns into receiving mode.
②
③
pi, bo, bo, bo
LED
Can you hear me?
Can you hear me?
Can you hear me?
(plays for 8 sec.)
pi, bo, bo, bo
*Voice spoken for 3 sec. before tapping
is recorded and played.
For details for Training
mode, please check the
video on the Yamagata
Casio official Youtube.
(Added at Ver. 201029 for LGS-RG004, LGS-RG005BA)
*OFF - No use (default)
*Beep - Only buzzers
*Voice - Voices and buzzers
Support on warnings released from dive computers
You can specify the function from followings:
(Dive computer interface)
