Casio KL-P350W, User Manual

Page: 35 / 39

34 35
Symptom Possible Cause Required Action
■ ●
No tape comes out
when I try to print. The tape compartment
cover is not closed
securely. Close the cover securely.
The cartridge is out of
tape. Replace the tape cartridge with a
new one (sold separately).
Tape is jammed. Remove the tape cartridge from
the printer and pull out the
jammed tape with your fingers.
Use scissors to trim off the tape
you pulled out. Next, correctly
load the cartridge back into the
printer.
Important!
Note the following while printing is in
progress.
• Do not allow the tape outlet to
become blocked.
• Do not touch the tape coming
out of the printer.
• Do not open the printer cover.
• Do not disconnect the AC
adaptor.
■ ●
The printer does
not cut the tape. Tape is jammed in the
tape outlet. Turn off power, remove the tape
cartridge, and clear the jammed
tape.
The tape cutter is dull. Contact your original retailer or a
CASIO Service Center for
replacement.
Magnetic Tape is
selected for the print
mode.
Note that selecting Magnetic
Tape automatically disables auto
cutting. After printing on magnetic
tape, feed the tape and then use
scissors to cut it. (
page 29 )
■ ●
The label does
not stick to the
intended surface. The surface or object is
inappropriate. A label cannot be affixed to a
surface that is rough, wet, oily,
dirty, etc. (
page 28 )
■ ●
Tape margins are
too big. The print format margin
setting is
Large or
Medium .
Change the setting to Small . Note
that the printer is designed to print
labels with a leading margin at the
beginning.