E-28
Handling the NFC
The NFC is a technology of contactless IC card for short range communication that
enables writing data to card and reading data from the card by applying the card close
to the NFC Reader on IT-G500.
The integrated NFC can read a contactless IC card used typically for employment
identification, etc.
1. Hold the card flat against the NFC reader ( ) on the top of the Handheld Terminal.
Important!
If reading a card is difficult, slightly change the position by moving it either close
to the NFC Reader or far away, or to the right or to the left.
Do not apply card while it is overridden by other card. The NFC may not read it
correctly.
A metal object near by the NFC Reader may cause the NFC not to read card
correctly. Take the card out of a wallet if the wallet is with metal object before
applying it to the NFC Reader.
Apply card in parallel with the NFC Reader to touch the NFC Reader with the
card.
Frequency band used by the NFC is 13.56 MHz. Secure a sufficient space
between IT-G500 and other reader/writer located in the vicinity. Make sure also
that a radio station employs the same frequency band does not locate near by
prior to using IT-G500.
•
•
•
•
•
