E-5
3. Load the battery pack. Note the battery
polarity (+/ -). Take care also to load the
battery pack so that the removal tape
extends above the battery.
4. Replace the battery pack cover and turn
the cover lock switches to the “LOCK”
position, as shown in the illustration.
When loading the high-capacity battery
pack, be sure to use the high-capacity
battery pack cover.
This precaution also applies when using
the optional flat battery cover.
Tip!
When attaching the battery pack cover, take care to ensure that the end with “FREE”
and “LOCK” markings faces the lock switches.
Removing
1. Make sure that the Handheld Terminal is turned off.
If the power is on, press the power key to turn it off.
2. Turn the battery pack cover lock
switches on the back of the Handheld
Terminal to the “FREE” position and
remove the battery pack cover.
3. Remove the battery pack by pulling
up the removal tape as shown in the
illustration.
Important!
When removing the battery pack, make sure you do not leave the Handheld
Terminal without a battery pack for more than about 4 minutes. Doing so can
cause data in the memory to be deleted.
When removing the battery pack, be sure you carefully follow the proper
procedure as explained in this guide.
Never try to use other type of battery than the ones that are specified for this
product.
When removing the battery pack, pull the removal tape straight up and remove
the battery pack. Removing with excessive force can damage the battery pack.
•
•
•
•