Casio G-Shock 5657 Operation Manual Download Page 8

Important!

Depending on light intensity and local
conditions, the watch may become hot
to the touch when exposed to light for
charging. Take care to avoid burn
injury after charging. Also, avoid
charging the watch under high-
temperature conditions like the ones
described below.

ー 

On the dashboard of a vehicle
parked in the sun

ー 

Near an incandescent light bulb or
other source of heat

ー 

Under direct sunlight or in other hot
areas for long periods

Checking the Charge Level

In the Timekeeping Mode, the current charge
level is indicated by the mode hand.

A

 

Good (high charge)

B

 

Good (medium charge)

C

 

Low Battery

Low Battery

A low battery will cause [LOW] to flash and will
disable the functions below.

Illumination

Sounds (alarm, etc.)

Connection with a phone

If the charge level drops even further, [CHG]
will flash and the hour and minute hands will
stop at 12 o’clock. If this happens, all functions
are disabled.

Dead Battery

The digital display will go blank if the battery
goes dead. Memory data is lost, and watch
settings are returned to their initial factory
defaults.

Important!

Should the battery go low or go dead,
expose the face (solar panel) to light as
soon as possible.

Exposing the watch to light while its
battery is dead will cause [CHG] to
start flashing. Expose the watch to light
to charge it until the Timekeeping
Mode screen re-appears.

Note

If [R] is flashing, it means that all
functions, except for timekeeping, are
disabled due to high momentary
battery power consumption.

Charging Time Guidelines

The table below shows guidelines for
approximate charging times.

Charging Times Required for 1 Day of
Operation

Light Level (Lux)

Approximate

Charging Time

50,000

8 minutes

10,000

30 minutes

5,000

48 minutes

500

8 hours

Times Required to Achieve Next Charge
Level

Sunny day, outdoors (50,000 lux)

Dead battery 

n

 Medium

charge

3 hours

Medium charge 

n

 High

charge

24 hours

High charge 

n

 Full charge

7 hours

Sunny day, near a window (10,000 lux)

Dead battery 

n

 Medium

charge

7 hours

Medium charge 

n

 High

charge

91 hours

High charge 

n

 Full charge

25 hours

Overcast day, near a window (5,000 lux)

Dead battery 

n

 Medium

charge

11 hours

Medium charge 

n

 High

charge

147 hours

High charge 

n

 Full charge

40 hours

Indoor fluorescent lighting (500 lux)

Dead battery 

n

 Medium

charge

147 hours

Medium charge 

n

 High

charge

-

High charge 

n

 Full charge

-

Note

Actual charging time depends on the
local charging environment.

Watch Operation Guide 5657

8

Summary of Contents for G-Shock 5657




























Reviews: