Casio G-Shock 5657, Operation Manual, Page: 19 / 27

●
After Arriving
1.
Swap the origin time zone time with the
destination time zone time.
After swapping Before swapping
Destination time
Destination time
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
2.
Enable auto time adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
3.
Adjust the time setting.
l
Triggering Immediate Time Adjustment
Stopwatch
The stopwatch measures elapsed time in
1/100-second units for the first hour, and in 1-
second units after that for up to 24 hours.
In addition to normal elapsed time
measurements, the stopwatch also lets you
take split time and lap time readings.
Split Times and Lap Times
●
Split time
A split time is the time elapsed from the start,
up to any point along the course of an event.
D
A
A
D
Goal
Split 3
Split 2
Split 1
Start
●
Lap time
A lap time shows the time elapsed during a
specific lap around a track, etc.
D
A
A
D
Goal
Lap 3
Lap 2
Lap 1
Start
Measuring Elapsed Time
1.
Enter the Stopwatch Mode.
l
Navigating Between Modes
2.
Use the operations below to measure
elapsed time.
Stop
Resume
Stop
Start
●
Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour After first hour
Minutes, seconds
1/100 seconds
Hours, minutes
Seconds
3.
Press (A) to reset the stopwatch to all
zeros.
Measuring a Split Time
1.
Enter the Stopwatch Mode.
l
Navigating Between Modes
●
If a lap time measurement operation is
displayed, clear it before proceeding to
step 2.
l
Measuring Lap Times
2.
Press (A) to display [SPL].
Minutes, seconds
Watch Operation Guide 5657
19