manualshive.com logo in svg

Casio fx-FD10 Pro, User Manual

Share
Download
Casio fx-FD10 Pro User Manual Download Page 209

α

-5

Message

Meaning

Countermeasure

Range ERROR  •  The spreadsheet cell range was 

exceeded by paste, recall, or other 
cell operation. 

•  Repeat the procedure taking 

care that the cell range is not 
exceeded.

Condition
ERROR

•  Execution of a calculation or 

function before all conditions 
required for execution are met. 

•  Check the conditions and make 

any necessary corrections. 

Non-Real
ERROR

•  Calculation that produces a complex 

number when Real is specified for 
the Complex Mode setting on the 
Setup screen, even though the 
argument is a real number. 

•  Change the Complex Mode 

setting to something other than 
Real.

Complex
Number In List 

•  List containing complex number 

used in a calculation or operation 
for which complex number data is 
invalid.

•  Change all data in the list to real 

numbers.

Complex
Number in 
Matrix

•  Matrix containing complex number 

used in a calculation or operation 
for which complex number data is 
invalid.

•  Change all data in the matrix to 

real numbers. 

Can’t Simplify 

 •  Fraction simplification was 

attempted using the

'

Simp function 

(page 3-19), but simplification 
could not be performed using the 
specified divisor. 

 

Example: Specifying a divisor of 3 to 
simplify the fraction 4/8. 

•  Specify a different divisor or 

execute

'

Simp without specifying 

any divisor. 

Can’t Solve! 
Adjust initial 
value or 
bounds. Then 
try again 

•  A Solve calculation could not obtain 

a solution within the specified range. 

•  Change the specified range.
•  Correct the input expression. 

No Variable 

•  No variable within a Solve equation. 

 •  Input a Solve equation that 

includes a variable. 

Conversion
ERROR

•  Attempting to use the unit 

conversion command to convert 
between two units in different 
categories.

•  Executing a conversion calculation 

using the same command twice in a 
conversion expression. 

•   In a conversion expression, 

specify two different commands 
that are in the same category. 

USB Connect 
ERROR

•  USB cable connection broken 

during data communication.

•  Use the USB cable to correctly 

connect the calculator and 
computer (or other device).

Memory Full

 •  Calculator memory became full 

while data was being received. 

•  Delete some data stored in 

calculator memory and try again. 

Summary of Contents for fx-FD10 Pro































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands