7-20
• The following describes each of the setting items for this screen.
Item
Description
1Var XCell
1Var Freq
The cell range data specified here is used for variable
x
and
Frequency values when performing single-variable statistical
calculations.
2Var XCell
2Var YCell
2Var Freq
The cell range data specified here is used for variable
x
, variable
y
,
and Frequency values when performing paired-variable statistical
calculations.
3. If you want to change the cell range, use
f
and
c
to move the highlighting to the item
you want to change and the input the new cell range.
• To input the colon (:), press
1
(:).
• To edit the currently input cell range, press
1
(CELL) (in the case of 1Var XCell, 2Var
XCell, and 2Var YCell) or
2
(CELL) (in the case of 1Var Freq and 2Var Freq).
4. After configuring the required settings, press
J
or
w
.
k
STAT Mode and S
•
SHT Mode Function Menu Correspondence Table
In both the
STAT
mode and the
S
•
SHT
mode, statistical graph functions are on the GRPH
function menu and statistical/regression calculation functions are on the CALC function menu.
The structures of these menus and their submenus are the same in the
STAT
mode and the
S
•
SHT
mode. For details about each menu item, refer to the pages referenced in the table
below.
For information about
this menu item:
Refer to:
{GRPH} - {GPH1}
“Changing Graph Parameters” (page 5-1)
{GRPH} - {GPH2}
{GRPH} - {GPH3}
{GRPH} - {SEL}
“Graph draw/non-draw status” (page 5-3)
{GRPH} - {SET}
“Changing Graph Parameters” (page 5-1)
“General graph settings”(page 5-1)
“To display the general graph settings screen”(page 5-2)
“General Graph Settings Screen Operations” (page 7-17)
{CALC} - {1VAR}
“Single-Variable Statistical Calculations” (page 5-20)
{CALC} - {2VAR}
“Paired-Variable Statistical Calculations” (page 5-20)
{CALC} - {REG}
“Regression Calculation” (page 5-21)
{CALC} - {SET}
“Using the Statistical Calculation Data Range Specification
Screen” (page 7-19)
