Casio fx-115ES User Manual Download

Page: 72 / 75

E-70

• Action

• Make necessary corrections.

Dimension ERROR (MATRIX and VECTOR Modes only)

• Cause

• The matrix or vector you are trying to use in a calculation was input without

specifying its dimension.

• You are trying to perform a calculation with matrices or vectors whose

dimensions do not allow that type of calculation.

• Action

• Specify the dimension of the matrix or vector and then perform the calculation

again.

• Check the dimensions specified for the matrices or vectors to see if they are

compatible with the calculation.

Variable ERROR (SOLVE feature only)

• Cause

• You did not specify a solution variable, and there is no X variable in the equation

you input.

• The solution variable that you specified is not included in the equation you

input.

• Action

• The equation you input must include an X variable when you do not specify

the solution variable.

• Specify a variable that is included in the equation you input as the solution

variable.

Can’t Solve Error (SOLVE feature only)

• Cause

• The calculator could not obtain a solution.

• Action

• Check for errors in the equation that you input.
• Input a value for the solution variable that is close to the expected solution

and try again.

Insufficient MEM Error

• Cause

• There is not enough memory to perform your calculation.

• Action

• Narrow the table calculation range by changing the Start, End, and Step values,

and try again.

Time Out Error

• Cause

• The current differential or integration calculation ends without the ending

condition being fulfilled.

• Action

• Try increasing the

tol

value. Note that this also decreases solution precision.

Summary of Contents for fx-115ES












































































Search results

Summary of Contents for fx-115ES

Reviews:

Related manuals for fx-115ES

Brands by name

Popular brands

Casio fx-115ES, User Manual

Search results

Summary of Contents for fx-115ES

Reviews:

Related manuals for fx-115ES

Brands by name

Popular brands