Casio fx-115ES User Manual Download

Page: 5 / 75

E-3

Safety Precautions

Be sure to read the following safety precautions before using this
calculator. Keep this manual handy for later reference.

Caution

This symbol is used to indicate information that can result in

personal injury or material damage if ignored.

Battery

• After removing the battery from the calculator, put it in a safe

place where it will not get into the hands of small children and
accidentally swallowed.

• Keep batteries out of the reach of small children. If accidentally

swallowed, consult with a physician immediately.

• Never charge the battery, try to take the battery apart, or allow

the battery to become shorted. Never expose the battery to
direct heat or dispose of it by incineration.

• Improperly using a battery can cause it to leak and damage

nearby items, and can create the risk of fire and personal injury.
• Always make sure that the battery’s positive

and negative

ends are facing correctly when you load it into the

calculator.

• Use only the type of battery specified for this calculator in

this manual.

Disposing of the Calculator

• Never dispose of the calculator by burning it. Doing so can

cause certain components to suddenly burst, creating the risk
of fire and personal injury.

Summary of Contents for fx-115ES












































































Search results

Summary of Contents for fx-115ES

Reviews:

Related manuals for fx-115ES

Brands by name

Popular brands

Casio fx-115ES, User Manual

Search results

Summary of Contents for fx-115ES

Reviews:

Related manuals for fx-115ES

Brands by name

Popular brands