Casio DT-X5M10E Service Manual Download Page 22

Page: 22 / 76

— 20 —

5. Go to the computer and browse to select all the test programs in the directory created in Step 1 in Setup

Programs (e.g. browse to the desktop folder PX791 Test and select all the programs) above.

6. Double-click the My Computer icon on the computer,then double-click Mobile Device and browse to

FlashDisk.

7. Copy all the programs from the test directory to the FlashDisk directory.

Figure: Copy Test Programs to Flash Disk

4-2. Booting and Ending the Hardware Diagnostic Program

■

To boot the program

1. Press the power button.

2. Push "0" key (which is an undisclosed com-

mand).

Power Button

Top Menu

1.Programs

2.Settings
3.Task Manager
4.Tray Icon Manager
5.Application Loader
6.Version Info

Top Menu is displayed.

Password Enter
Password:

Password input screen is
displayed.

Summary of Contents for DT-X5M10E













































































Search results

Summary of Contents for DT-X5M10E

Reviews:

Related manuals for DT-X5M10E

Brands by name

Popular brands

Casio DT-X5M10E, Service Manual

Search results

Summary of Contents for DT-X5M10E

Reviews:

Related manuals for DT-X5M10E

Brands by name

Popular brands