background image

— 8 —

Disassembly Steps

The following table lists the disassembly steps, and on which page to find the related information.
PLEASE PERFORM THE DISASSEMBLY STEPS IN THE ORDER INDICATED.

To Remove the Battery Holder/Battery Pack:

1. Remove the battery holder/battery pack .......................................................................................... page 9

To Separate the Front and Back Case Covers:

1. Remove the battery holder/battery pack .......................................................................................... page 9
2. Separate the front and back case covers ...................................................................................... page 10

To Remove the Bridge Board:

1. Remove the battery holder/battery pack .......................................................................................... page 9
2. Separate the front and back case covers ...................................................................................... page 10
3. Remove the bridge board .............................................................................................................. page 11

To Remove the 1D Laser:

1. Remove the battery holder/battery pack .......................................................................................... page 9
2. Separate the front and back case covers ...................................................................................... page 10
3. Remove the 1D Laser .................................................................................................................... page 12

To Remove the Mainboard:

1. Remove the battery holder/battery pack .......................................................................................... page 9
2. Separate the front and back case covers ...................................................................................... page 10
3. Remove the 1D Laser .................................................................................................................... page 12
4. Remove the mainboard .................................................................................................................. page 13

To Separate the Middle Case from the Front Case:

1. Remove the battery holder/battery pack .......................................................................................... page 9
2. Separate the front and back case covers ...................................................................................... page 10
3. Remove the 1D Laser .................................................................................................................... page 12
4. Remove the mainboard .................................................................................................................. page 13
5. Separate the middle case and front case ...................................................................................... page 14

To Remove the Key Pad:

1. Remove the battery holder/battery pack .......................................................................................... page 9
2. Separate the front and back case covers ...................................................................................... page 10
3. Remove the 1D Laser .................................................................................................................... page 12
4. Remove the mainboard .................................................................................................................. page 13
5. Separate the middle case from the front case ............................................................................... page 14
6. Remove the key pad ...................................................................................................................... page 15

To Remove the LCD:

1. Remove the battery holder/battery pack .......................................................................................... page 9
2. Separate the front and back case covers ...................................................................................... page 10
3. Remove the 1D Laser .................................................................................................................... page 12
4. Remove the mainboard .................................................................................................................. page 13
5. Separate the middle case from the front case ............................................................................... page 14
6. Remove the LCD ........................................................................................................................... page 16

Summary of Contents for DT-X5M10E













































































Reviews: