DT-X200 Hardware Manual
P.19
3.1.3. USB and Charging Unit
Item Specification
Remark
Standard
USB Ver.1.1 compatible
Baud rate
Max. 12 Mbps (maximum)
Pin Layout
See Figure 2.9.
Description See
Table
2.10.
USB Client
Connector
1
2
4
3
USB connector B type
1 VBus
2 – Data (D -)
3 + Data (D+)
4 GND
Input voltage
DC 5V±5%
Current consumption
DC 5V, Approx. 3A (maximum)
When supplying power or
transmitting data.
Plug
EIAJ RC-5320A type 2
Power from AC
Adaptor
AC Adaptor
AD-S15050B or AD-S15050B-CN Dedicated
AC
adaptor
Output voltage
DC5.0±0.25V
Output current
3.0 A (maximum)
Power
Charge method
Constant voltage method
Charge by integrated
battery charge circuit
Pin Layout
The pin layout below shows when the Cradle is viewed at the front.
Pin Layout and the description
Pin no.
Signal
Description
Direction
1
V CRADLE
Power supply to the terminal and charge the
battery pack installed in the terminal.
-
2
D +
USB D +
IN/OUT
3
D -
USB D -
IN/OUT
4
USB_ID
Switch-over between USB host and USB client*
OUT
5
V BUS
Power from USB cradle
-
6 GND GND
-
CASIO COMPUTER CO., LTD.
