18
Serial interface
Standard
USB slave
Connector: USB mini-B 5-pin
Transmission speed
12 Mbps (Max.)
Audio
Earphone output, Microphone
input
φ
2.5
PC card (applicable to DT-X10M10E)
Specification PC
card
Type I/II (3.3V/5.0V)
Supply current
450 mA (5.0V), 500 mA (3.3V)
Constant supply current values
Wireless LAN interface (applicable to DT-X10M10RC and DT-X10M10RC2)
Frequency category
ISM
Standard
IEEE802.11b
See note 2
Modulation Direct
Sequence
(“DS”)
Frequency band
2,400 MHz to 2,483.5 MHz
Transmission speed
11 Mbps (Maximum)
Communication range
Indoor 50 m, Outdoor 150 m
The range may vary depending on the
environment.
No. of channels
13 (ETSI)
3 channels for concurrent use.
Other features
Roaming within multiple
Access-Points
CF card interface
Card type
CF card Types I/II (3.3V)
Supply current
500 mA (3.3V) maximum
CF extension slot (Option)
Power
Operating power
Lithium-ion battery pack x 1pc
DT-5023BAT or DT-5025LBAT
Memory backup power Lithium secondary batter x 1pc
Built-in, not replaceable 50mAH
Approx. 8 H (DT-5023BAT)
Approx. 18 H (DT-5025LBAT)
Assuming; wait:calculation:scanning 20:1:1
Approx. 4 H (DT-5023BAT)
Battery life
Approx. 10 H (DT-5025LBAT)
Assuming; wait : scanning : wireless LAN
operation 13:3:4
DT-5025LBAT
2 weeks
Memory backup by
Lithium-ion battery
pack
DT-5023BAT 1
week
See note 3.
10 minutes for data in RAM
Memory backup by
only Lithium secondary
battery
2 weeks for built-in clock
Under conditions with room temperature and
memory backup battery fully charged
See note 4.
Memory backup
battery charge time
4 days
A period required to charge the memory backup
battery with DT-5023BAT (or DT-5025LBAT)
being installed in the terminal.
Power consumption
DC2.5A/ DC3.7 to 5.0V
Buzzer
Sound pressure
70 dB or greater
Weight
Approx. 360 g
DT-X10M10E
Approx. 410 g
DT-X10M10RC/M10RC2
Dimensions
Approx. 220(D) x 77(W) x 47 (H) mm
Notes:
1.
A font that can be used to print characters of any size.
2.
Concurrent use of Wireless LAN communication with Bluetooth communication is not recommended.
3.
Each memory backup period will depend on the characteristic of terminal itself, the surroundings including
temperature, humidity. Thus, the periods described in Table 4.1 are recommended for use for reference
only. They are not guaranteed figures.
4.
Backup for both data in RAM and the RTC (built-in clock) will commence when the battery pack (either
DT-5023BAT or DT-5025LBAT) runs down.
