Error Message Resolution Guide
Message
Reason
Solution
Reference Tech Note
Font Loading Error;
Could not load the font.
Ensure that the font is available to load.
---
Printer Not Ready\nPress R to
Retry\nC to Cancel Print;
Can not print.
Check cable, battery, communication
settings and paper in the printer.
---
Mobile Unit in\nDemonstration
Mode\nfor TwinClient;
Running in demo mode.
Purchase a license from Connect.
---
Connected to Host;
Successful connection to the target
Host.
Advisory message.
---
Telnet Mode not\nsupported on\nthis
Mobile Unit;
This Mobile Unit must be used with
a Connect Server.
Order a Connect Server.
---
Telnet Setup files\nnot found.
Reload\nfiles then switch;
Customer specific configuration
files are missing.
Load the configuration files into the Mobile
Unit from Twin Client Manager.
---
Switched Client to\nTelnet Direct Mode; Mobile Unit running in Telnet mode
direct to the target Host.
Advisory message.
---
Switched Client to\nServer Based
Mode;
Mobile Unit running through a
Connect server in server mode
usually at port 1800.
Advisory message.
---
Port 23 is only\nallowed in Telnet
Mode;
Can not set the port to 23 in server
mode. Port 23 is the standard
Telnet port.
Advisory message.
---
Not Enough Memory\nTo Run;
Mobile Unit does not have the
capacity to run the program do to
memory restrictions.
Expand the Mobile Unit memory.
---
Press any key;
Press a key to continue.
Advisory message.
---
Supported Equipment Manual
•
March, 2006
4-7
