EN-130
Reference
Compressor
Compresses the input signal, which can have the effect of suppressing level variation.
Attack
Attack
Adjusts the time until compression goes into effect. A smaller
value causes prompt compressor operation, which suppresses
the attack of the input signal. A larger values delays compressor
operation, which causes the attack of the input signal to be
output as-is.
000 to 127
Release
Release
Adjusts the time until compression is released after the input
signal drops below a prescribed level. When an attack feeling is
desired (no compression at the onset of the sound), set this
parameter to as low a value as possible. To have compression
applied at all times, set a high value.
000 to 127
Ratio
Ratio
Adjusts the compression ratio of the audio signal.
1:1, 2:1, 4:1, 8:1,
16:1, 32:1, Inf:1
WetLevel
Wet Level
Adjusts the level of the effect sound. Output volume changes in
accordance with the Ratio setting and the characteristics of the
input tone.
000 to 127
DryLevel
Dry Level
Adjusts the level of the direct sound.
000 to 127
Limiter
Limits the input signal level so it does not rise above a preset level.
Limit
Limit
Adjusts the volume level of the limit at which limiting is applied.
000 to 127
Attack
Attack
Adjusts the time until the compression effect starts. A smaller
value causes prompt limiter operation, which suppresses the
attack of the input signal. A larger values delays limiter operation,
which causes the attack of the input signal to be output as-is.
000 to 127
Release
Release
Adjusts the time until compression is released after the input
signal drops below a prescribed level.
000 to 127
WetLevel
Wet Level
Adjusts the level of the effect sound. Output volume changes in
accordance with the Limit setting and the characteristics of the
input tone. Use this parameter to correct for such changes.
000 to 127
DryLevel
Dry Level
Adjusts the level of the direct sound.
000 to 127
Enhancer
Enhances the profiles of the low range and high range of the input signal.
Low Freq
Low Frequency
Adjusts the low range enhancer frequency.
000 to 127
Low Gain
Low Gain
Adjusts the low range enhancer gain.
000 to 127
HighFreq
High Frequency
Adjusts the high range enhancer frequency.
000 to 127
HighGain
High Gain
Adjusts the high range enhancer gain.
000 to 127
In Level
Input Level
Adjusts the input level.
000 to 127
WetLevel
Wet Level
Adjusts the level of the effect sound.
000 to 127
DryLevel
Dry Level
Adjusts the level of the direct sound.
000 to 127
Module Name
Description
Settings
Display
Parameter Data
CT-X9000_8000IN_EN.book 130 ページ ２０１８年４月１２日 木曜日 午後１時８分
