manualshive.com logo in svg

Casio CLASSPAD II, User Manual

Share
Download
Casio CLASSPAD II User Manual Download Page 268

Appendix

  

268

Error Message

Description

Incorrect Program Call

–

Insufficient Elements

–

Insufficient Memory

There is not enough memory to complete the 
operation you are trying to perform. 

Insufficient Storage Memory

Insufficient available capacity in the storage area.

Invalid Boundary

The specified boundary conditions are not 
appropriate for the operation being performed.

Invalid Code

–

Invalid Data Type

• The calculation you are trying to perform has an 

invalid data type as an argument. 

• You are attempting to import or open an invalid file 

type. 

Invalid Dimension

The two lists or matrices you are trying to perform a 
calculation between have different dimensions.

Invalid file or folder name.

Folder, file, or path name is too long, so the folder or 
file cannot be created in the mass storage area.

Invalid for Local Variable

You attempted to perform an operation that is 
prohibited for a local variable.

Invalid in a Function or Current Expression

You are trying to perform a calculation using an 
expression that contains an illegal command (or 
function).

Invalid Name

You are trying to use an improper folder name, 
variable name (including functions and programs), or 
label name.

Invalid Outside Function or Program

You are trying to execute a command that must 
be used inside of a program as a local command, 
outside of a program.

Invalid Path

You are trying to specify an invalid path. This 
error occurs when you include a system folder in 
a path, when you include a system variable in a 
path, or when you try to specify a path where path 
specification is not allowed.

Invalid String

The command you are trying to execute has an 
invalid string specified as an argument.

Invalid Syntax

The syntax you are trying to use is not correct.

Invalid Table Input Value

–

Invalid Variable Reference

The variable you are trying to access does not exist. 
This error occurs when you try to read the contents 
of a system variable that does not contain any data, 
etc.

Invalid View Window Value

–

Locked or Protected

–

Maximum value needs to be larger than minimum

–

Memory is full

Memory has become full during a data 
communication operation.

Nesting of subroutines exceeds 40 levels

–

No file is specified

–

No Sequences Selected

–

No Sheet Name

–

Summary of Contents for CLASSPAD II




















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands