EN-62
Getting Ready
1.
Unfasten the band
1
that bundles the pedal
cable to the back of crosspiece
D
and pull
the pedal cord out from the crosspiece.
2.
Attach side panels
A
and
B
to crosspiece
D
. Secure the side panels using four screws
E
.
•
When installing parts
2
, slide the brackets
3
into
the slots in either end of crosspiece
D
. If the brackets
3
are not inserted into the ends of the crosspiece
D
as far as they will go, the screws
E
will not be able to
enter into the screw holes of the brackets
3
, which
can strip the threads of the screws.
•
Cover the screw heads with the caps
I
.
3.
Slide back panel
C
into the grooves
4
of
the side panels.
•
When installing back panel
C
, make sure that the
high screw holes of the back panel are to the right,
and the low screw holes are to the left.
4.
Attach the left side of back panel
C
to the
bracket
5
of side panel
A
, and the right
side to side panel
B
. Partially tighten two
H
screws to hold the back panel in place
temporarily.
•
When inserting the screws, you will need to lift up
back panel
C
so its screw holes become aligned with
the screw holes of the brackets
5
.
•
At location
6
, slip the clip
G
onto to the screw
H
before installing the screw.
1
Pedal cable
A
D
B
I
I
3
2
E
E
C
4
4
High
Low
H
H
5
6
5
G
H
B
A
5
C
GP500-ES-1C.indd 64
2015/10/28 14:20:44
