Playing a Built-in Song
EN-77
Use the procedure below to assign the song tone to the keyboard so you can play along.
1.
Press
SONG
.
This displays the song screen.
2.
Rotate the dial to select a song.
3.
Long-press
SONG
.
This momentarily displays “TONE SYNC ON”.
•
“TS” is displayed while tone sync is enabled.
4.
To disable tone sync, long-press
SONG
again.
This momentarily displays “TONE SYNC OFF”.
•
Selecting a song while tone sync is enabled automatically changes to the recommended tone setting
for the song.
•
If there is a tone change within a song, enabling Tone Sync causes the keyboard tone also to change
automatically when the playback melody changes.
•
The reverb setting is also the one recommended for the song.
•
Changing the tone or reverb setting automatically disables tone sync.
•
Enabling tone sync automatically causes the upper octave shift setting and the upper1 octave shift
setting to become 0.
•
Turning on tone sync automatically resets the chorus type to its initial default setting.
Matching the Keyboard Tone and Song Tone (Tone Sync)
Tone Sync enabled
